|Rated Voltage:||100-220V||Rated Power:||25-30W|
|Heater:||PTC||Heating Plate Size:||81.5x18mm|
|Temperature Range:||140℃-220℃, 4 Different Settings||Power Cord:||Fixed Cord|
|Housing Materials:||PET+Fiber(High Temp Composites)||Heating Plate Materials:||Aluminum|
|Negative Ion Concentration:||11 Million/cm³||Hairstyle Making:||Comb/Straight/curl|
Tourmaline Ceramic Beard Straightener Brush,
PTC Heating Beard Straightener Brush,
PTC Heating electric beard straightener comb
Beard and Hair Straightening Brush
1,Beard Straightening and Hair Styling
2,4 Temperatures & Constant Temperature Setting
3,PTC Ceramic Heating & Auto Shut-Off
4,True Beard Compacity
5,Portable Design & Easy to Use
Beard and Hair Straightener Brush
|3.Rated Voltage:||100-220V||13.Switch Mode:||On/adjust|
|4.Power:||25-30W||14.Auto shut off:||60 minutes|
|5.Heater:||PTC||15.Negative ion concentration||11 million/cm³|
|6.Heating plate size:||81.5x18mm||16.Product size:||195×32×27mm|
|7.Temperature range:||140℃-220℃, 4 different settings||17.Product weight:||0.208kg|
|8.Power Cord:||Fixed cord||18.Gift Box Dimension:||250×80×53mm|
|9.Housing materials:||PET+Fiber(High Temp Composites)||19.Gross Weight:||0.282kg|
|10.Heating plate materials:||Aluminum||20.Qty per Carton||25pcs|
|Remark: Due to the continuous improvement, the above parameters are subject to change without prior notice.|
1.Wash your beard(hair) thoroughly combit and dry. This will prevent dirt from burning in the beard(hair) and (hair) itself .Really, waituntilthebeardiscompleieydy
2.Take the Beard Straightener out ofhe package.
Make sure that the heaters brush leeth) are clean and nothing is attached to them
3.Plug it in a socket with the appropriate voltage.
The Beard Straightener Lurns on but remains in the OFF positionwith the healers not heating
4.Press the power button (the only one on the device) and press
it again to select the temperature to which you want to heat the Beard Straightener just wait to let the Beard Straightener get heated
5.Straighten the beard (hair)from the roots to the ends.
6.When you are done hold down the power bulton for 3 seconds to turn off the device. The device has a protective shut down after 30 minutes but we do not recommend using it for that long Also, we recommend unplugging the cable when youare finished.
7.After switching off and disconnecting. place the Beard Straightenerin a dry, level and non-flammableplace.Put the heating elements (teeth) upwards to cool down
8.Now you can put oil, balm, or any other styling or nourishing product on your beard.