|Input Voltage:||DC 5V/1A||Rated Power:||5.5W (Max)|
|Output Cycle:||90KHZ||Lithium Battery:||1100mAh|
|Charging Time:||2 Hours||Battery Life:||1 Hour|
|Adjustments:||4 Gears||LED Lights:||Red/Blue|
|Product Size:||162×52×35.5mm||Product Weight:||0.257Kg|
Anti Aging EMS RF Facial Device,
90KHZ RF Facial Device,
90KHZ rf ems beauty instrument
Portable RF tender skin apparatus
RF technology can activates collagen, elastin, and hyaluronic acid stimulation. Smoothens skin texture, making wrinkles less visible, and your face will looks more defined and beautiful.
2.IAP MODE(Import AbsorPtion)
Electroporation can reduce the cell wall’s resistance, rendering it more permeable. This then allows us to transfer a wide range of naturally nurturing solutions or oils into the skin cells.
3.TS mode(Tight Skin)
High-frequency Bio-Currents has an effect on the skin, muscles, lymphatics and blood vessels, which can lead to a muscle build-up and a constant lifting effect.
4.Cooling & Heating mode
Heating mode helps open up your pores to deliver deeper clean and absorption.
Cooling mode helps shrink pores,tighten up skin,improve puffiness and fine lines.
HOW TO USE IT
Step 1: Press and hold the power button for three seconds to turn on
Enter ATW mode. ATW mode is recommended to use for 5 minutes.
Massage method: ①The chin is along the lower jaw to the sideburns
②Law lines: nose to temples
③Forehead line: brow bone to hairline
Step 2: Short press the power button to enter IAP mode. It is recommended to use this mode for 5 minutes.
Massage method: center the nose in a circular motion clockwise. (Mainly used to promote the absorption of facial masks, essences, lotions and other moisturizing skin care products.)
Step 3: Short press the power button to enter the TS mode, this mode is recommended to be used for 10 minutes.
Massage method: same as ATW mode
Step 4: Short press the power button to enter the cold compress mode, the cold compress is on the back of the probe.
Step 5: Short press the power button to enter the hot compress mode, the hot compress is on the back of the probe. You can also do hot compress care as the first step as shown in the video.
Step 6: Press and hold for three seconds to shut down, clean the probe part with a clean wet wipe, and place it in a cool and dry place.
(PS: ATW and IAP mode, it is recommended to use 2-3 times a week, each two modes for a total of 10 minutes, TS, vibration mode can be used once a day, one time is recommended to use 10 minutes. Each mode can be used independently. The bottom button is the vibration mode button, the middle button is the energy level adjustment button, the highest energy level is fourth level.)
|1.Product name||Portable RF tender skin apparatus||11.Key features:||Tightening/Lifting/Firming|
|2.Product number:||BM10||12.Waterproof rate:||IPX5|
|3.Input voltage:||DC 5V/1A||13.Certificate:||CE/ROHS/FCC/PSE|
|4.Rated power:||5.5W (Max)||14.Switch Mode:||On/off/adjust|
|5.Lithium battery:||1100mAh||15.Auto shut off:||5 minutes|
|6.Charging time:||2 Hours||16.Product size:||162×52×35.5mm|
|7.Battery life:||1 Hour||17.Product weight:||0.257Kg|
|8.Adjustments:||4 gears||18.Gift Box Dimension:||21*12*5.5cm|
|9.LED lights:||Red/Blue||19.Gross Weight:||0.471Kg|
|10.Materials:||Aluminum/ABS/PC||20.Qty per Carton||25pcs|
|Remark: Due to the continuous improvement, the above parameters are subject to change without prior notice.|