|Rated Voltage:||100-220V||Rated Power:||25-30W|
|Heater:||PTC||Heating Plate Size:||81.5x18mm|
|Temperature Range:||140℃-220℃, 4 Different Settings||Power Cord:||Fixed Cord|
|Housing Materials:||PET+Fiber(High Temp Composites)||Heating Plate Materials:||Aluminum|
|Negative Ion Concentration:||11 Million/cm³||Hairstyle Making:||Comb/Straight/curl|
30W Beard Straightener Heat Brush,
81.5x18mm Beard Straightener Heat Brush,
30W beard flat iron brush
Beard and Hair Straightening Brush
1.2-in-1 Premium beard straightening and hair styling
2.Advanced Ionic Technology gives you better experience of hair repairing
3.25s Fast Heat Up & 4 Adjustable Temperature
4.Anti-scald design & Safety Shut-off Features
5.Ergonomic, portable design
1.Can I use this beard straightening comb on my wet beard?
They’re electric beard straighteners, the moisture from a wet beard combined by the high heat that is produced by a heated beard straightener will boil instantly and cause steam that could irritate your neck and face. We recommend that if you wash your beard before use, for safety sake, towel it dry thoroughly before you use the beard-straightening-comb.
2.Will this work on a short beard?
Mine is not extremely long and this works great on my shorter beard.
3.What material is the comb bristles made of?
This comb bristles is extra long,constructed of high-quality glass fiber , anti-scald coated teeth materials, high elasticity, durable, not easy to break off.
4. Does the Beard Straightener harm the beard(hair)?
The higher the temperature, the more harms your beard willget.That is why the temperature reaches 220 'C maximum, itis to protect the beard and everything else from damage. Themost important is this beard straightener always provides negative ions when using, which is good for your beard.
5. How long does the straightening take?
This mainly depends on the set temperature, length, and bear/hair roughness. Nevertheless, you'd better be donewithin five minutes.
Beard and Hair Straightener Brush
|3.Rated Voltage:||100-220V||13.Switch Mode:||On/adjust|
|4.Power:||25-30W||14.Auto shut off:||60 minutes|
|5.Heater:||PTC||15.Negative ion concentration||11 million/cm³|
|6.Heating plate size:||81.5x18mm||16.Product size:||195×32×27mm|
|7.Temperature range:||140℃-220℃, 4 different settings||17.Product weight:||0.208kg|
|8.Power Cord:||Fixed cord||18.Gift Box Dimension:||250×80×53mm|
|9.Housing materials:||PET+Fiber(High Temp Composites)||19.Gross Weight:||0.282kg|
|10.Heating plate materials:||Aluminum||20.Qty per Carton||25pcs|
|Remark: Due to the continuous improvement, the above parameters are subject to change without prior notice.|
1.Wash your beard(hair) thoroughly combit and dry. This will prevent dirt from burning in the beard(hair) and (hair) itself .Really, waituntilthebeardiscompleieydy
2.Take the Beard Straightener out ofhe package.
Make sure that the heaters brush leeth) are clean and nothing is attached to them
3.Plug it in a socket with the appropriate voltage.
The Beard Straightener Lurns on but remains in the OFF positionwith the healers not heating
4.Press the power button (the only one on the device) and press
it again to select the temperature to which you want to heat the Beard Straightener just wait to let the Beard Straightener get heated
5.Straighten the beard (hair)from the roots to the ends.
6.When you are done hold down the power bulton for 3 seconds to turn off the device. The device has a protective shut down after 30 minutes but we do not recommend using it for that long Also, we recommend unplugging the cable when youare finished.
7.After switching off and disconnecting. place the Beard Straightenerin a dry, level and non-flammableplace.Put the heating elements (teeth) upwards to cool down
8.Now you can put oil, balm, or any other styling or nourishing product on your beard.